Haas EC-400 Horizontal Machining Center Start Price USD 100,000.00 Current Price USD 100,000.00 Time Left - Bid Count 0 Buy It Now Price USD 134,500.00 Reserve Price - Start Time Monday, September 29, 2008 End Time Thursday, October 09, 2008 Location Carson City, Nevada See more about 'Haas EC-400 Horizontal Machining Center' Description General Specifications As Per Brochure Travel: X-Axis: 20" Y-Axis: 20" Z-Axis: 20" A-Axis: 1 deg Face Gear Indexing 1 Deg Indexer: Indexing Accuracy: +/- 3 arc-sec Repeatability: +/- 1 arc-sec Gear Ratio: 72:1 worm & gear 90 deg Rotation Time (Indexer): 3.6 sec 4th Axis: Min. Resolution: Full 4TH Axis Rotational Torque (cont.): 300 ft-lb Brake Torque: 500 ft-lb @ 100 PSI Backlash: 30 arc-sec Indexing Accuracy: +/- 15 arc-sec Repeatability: 10 arc-sec Gear Ratio: 72:1 worm & gear 90 deg Rotation Time (Indexer): 3.6 sec Spindle: Taper Size: 40 Taper Speed: 12,000 RPM Motor: 30HP Drive System: Inline Direct Drive Max. Torque @ RPM: 75 ft-lb @ 1400 RPM Bearings: ABEC Class 7 Pallet Changer: Width x Length: 15.75" x 15.75" Max. Weight on Each Pallet: 1,000 lbs Pallet Change Time: 8 sec Tool Changer: Capacity: 40 + 1 Type: CT-40 Max. Tool Diameter: 3" (w/all pockets full) Max. Tool Weight: 12 lb Change Time (avg) Tool to Tool: 2.1 sec Change Time (ave) Chip to Chip: 3.7 sec Max. Tool Length (from gage line): 12" Accuracy: Positioning: +/- 0.0002" Repeatability: +/- 0.0001" Feedrates: Rapid: 1000 in/min Max. Cutting: 500 in/min Motors: X-Axis Max. Thrust: 4,600 lbs Y-Axis Max. Thrust: 4,600 lbs Z-Axis Max. Thrust: 4,600 lbs Door Opening Width (Front): 28.7" Door Opening Width (Sides): 27.75" Enclosure Material: 14 GA cold-rolled steel Coolant Flow Rate: 4 GPM Coolant Capacity: 80 gallon Air Required (min): 9 CFM @ 100 psi Power: 14 KVA; 200-250 VAC 3-phase; 50-60 HZ Weight (Approx): 25,000 lbs Equipped with (must be verified by buyer): 20" x 20" x 20" Work Cube Dual 400MM Pallets Full 4th Indexing Auger Chip Removal 12k spindle VQC and probing Tooling colum 40 station side mount tool changer All available manuals Hours: Servo 5273 spindle 2694 For additional information contact Mike Reeves at 800-543-7666 or mike@automatics.com Rigging and Freight are the responsibility of the buyer.  A&M can arrange these services. IAMMDNA Place a Bid!