Gas Powered 25GPM Waste Oil Transfer Pump,WVO,Biodiesel Start Price USD 2,099.00 Current Price USD 2,099.00 Time Left - Bid Count 0 Buy It Now Price USD 2,199.00 Reserve Price - Start Time Monday, August 25, 2008 End Time Thursday, September 04, 2008 Location Watertown, South Dakota See more about 'Gas Powered 25GPM Waste Oil Transfer Pump,WVO,Biodiesel' Description FOR MORE INFORMATION ABOUT THIS OR ANY OF OUR OTHER PUMPS, GO TO REDLINEPUMPS.COM  Here is our MP5000-55GHES which features a 5.5 HP Electric Start Honda gasoline powered engine and a 25 GPM heavy duty cast iron pumping unit with steel gears and 1 1/4" inlet and outlet ports. It has a set of 14 foot long battery cables you hook up to a remote battery to start the unit. This unit also has a belt and pulley drive system, a heavy duty solid steel frame with mounting holes and a safety shield. This system also has a full set of quick coulpers with plugs and caps, a 48" suction wand with debris screen, and 24 feet of 1 1/2" suction hose. We can add hose upon request. Add $2.50 per foot for extra hose. This unit is designed for collecting, straining, and transferring petroleum based liquids like new or used motor oil) and waste vegetable oil. It cannot be used to transfer any flammable liquids like gasoline! It has a powerful suction force that will self prime and has a 19 foot lift capacity. It's cast iron pumping unit has an adjustable pressure relief system that can create up to 125 PSI. The relief flow can be internally or externally ported. This system can be used to transfer new or used motor oil, diesel, or waste vegetable oil. It can be used in cold temperatures (below 40 degrees). This is done by slowing the speed of the engine allowing the oil time to flow through the suction line without causing cavitation in the oil source. Shipping cost for this system is $200.00 to the lower 48 states. Thanks,  redlinepumps  Place a Bid!