Complete Cemco PCB / Circuit board Lab Test Equipment
| Start Price |
GBP 2,499.99 |
| Current Price |
GBP 2,499.99 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Friday, July 04, 2008 |
| End Time |
Monday, July 14, 2008 |
| Location |
Coventry, West Midlands |
|
See more about 'Complete Cemco PCB / Circuit board Lab Test Equipment'
|
Description
vchohantrading Store For sale Cemco-Fsl PCB / Circuit board lab test equipment listed below 1) Peel & Pull Off Tester 2) Solderability Tester 3) Change In Resistance Analyser with fluidised sand bath 4) Solvent Resistance Tester 5) Accelerated Ageing Machine Details and specifications given below. This is a practically a complete PCB physical property testing lab. Condition These items came from a working lab in a maufacturing facility which due to retirement stopped production on 21st June 2007. The equipment is in good condition with standard wear and tear, see pictures All equipment was and should be in good working order. Notes: The plastic boot cover over the dipper arm of the solderability tester will need replacing since it has become brittle and cracked should be fairly cheap and easy replacement see last picture in group below. There is no manuals with the systems but since you are looking at these items you should have a fair idea to the function and the equipment itself is fairly straight forward to use, again the operational parameters should be set using the relevant IEC international standards (manuals can be obtained from cemco if required). The ageing machine requires oxygen/nitrogen cylinders to function these are not included since they where on hire from BOC. There is a fluidised sand bath for use with the Change In Resistance Analyser An extra cemco printer is included for use with the change in resistance analyser. A small crompton compressor is also included for air delivery to the sand bath. These items are currently in dry storage. If you require extra pictures please ask Postage Items are either heavy and/or bulky so please ask for a quote for delivery or they can be collected. Guide Price New this kit would be in the region of £45,000 to £50,000 basic Used about £15,000 basic if you are able to get hold of it. For more details see http://www.cemco.com/test_equipment.htm Details & Specifications 1) Peel & Pull Off TesterThe Cemco-Fsl Peel and Pull-Off Machine is designed to enable testing in accordance with the following specifications: Conductor peel IEC 326-2 test method 10a Plated Through Hole pull out IEC 326-2 test method 11b Land pull off IEC 326-2 test method 11a For Pull testing a sample is clamped to the base table and the conductor to be tested is connected to the load cell, which is then slowly driven up from the table, to tension the test conductor. The display shows the force attained when the conductor begins to separate from the base material. During Peel tests the base table is driven horizontally to maintain a vertical pull of ± 1 degree on the sample. Key Benefits: Accurate measurement of peel and pull forces Vertical and horizontal speeds fully adjustable Simple to operate via compact computer keypad and display Results shown in Newtons, Kilogrammes or Pounds Robust construction, minimum maintenance Technical Specification: Electrical Requirement: 220/240 volt, 200 watt Vertical travel: 100 mm (4") typ.Horizontal travel: 100 mm (4") typ.Speed: 0-100 mm/min (0-4"/min)Low range reading: 0-25 NHigh range reading: 0-250 NDimensions: 675W x 590D x 550H mm (27" x 23" x 22")Weight: 26 Kgs (55 lbs) 2) Solderability Tester The Cemco-Fsl Multifunction Solderability Tester is capable of carrying out the Rotary Test, the Vertical Dip Test for component leads, and the Solder Globule Test. The machine features microprocessor control , self calibration facility, and a liquid crystal display. The control system will only accept commands within specified limits and tests will not commence until solder temperature is within 3oC of the set point. May require printer Rotary TestThe Rotary Solderability Tester is designed to perform the tests described in IEC 68-2-20 test Tc for assessing the solderability of printed circuits by simulating wave soldering conditions. Vertical Dip Test The Vertical Dip function performs the tests described in IEC68-2-20 test Ta for determining the solderability of wires, tags and terminations of irregular form.Solder Globule Test The Solder Globule Test (IEC 68-2-20 test T clause 4.8) provides a procedure to measure the soldering time of round wire terminations. Technical Specification:Temperature : Degree’s C or FMax solder temp : 300o CImmersion range : 0.5 - 19.9 SecondsDepth resolution : 0.1 mmDwell time : 0 - 19.9 secondsWarm up time : 30 mins. approxTemperature resolution : + or -1o CDip depth : 0 - 30mDip/withdraw speed : 1-50 mm/secPower consumption : 600WVoltage: 110/120 or 220/240 Dimensions: (mm) W675 x D590 x H440 Weight: 30 Kgs 3) Change In Resistance Analyser The Cemco-Fsl Change in Resistance Analyser measures and records the increase in resistance of plated through holes which are subjected to thermal cycling by immersion in heated sand and water baths. The increase in resistance gives an indication of the plating quality. The Analyser will reduce sampling costs and simplify the IEC326-2 test method 3c. The machine is designed for total reliability, accuracy and versatility; the computer-controlled keypad and display make the equipment logical and simple to use. Test data can be displayed or printed out. If a sample fails the test, stored data can be obtained to assist in pinpointing cause of failure. The Analyser and Sample Holder can be supplied for use with independently controlled sand and water baths, or with an optional Temperature Control Unit to allow programmable control of the sand and water bath temperatures. Key Benefits: Reduced test times compared with conventional methods Simple set-up and use with computer displayed menus Continuous monitoring of samples for resistance anomalies Tests 6 samples simultaneously, up to 10 thermal cycles Automatic computer control of all test parameters Full results print-out for each sample Technical Specification: Sand bath temp. 30-300o CWater bath temp. 10-90o CHot immersion time 1 - 100 secs.Cold immersion time 1 - 100 secs.Recovery time 1-8353 secsHot %age failure 5-500Cold %age failure 5-500Max. %age failure 5-500No. of thermal cycles 1-10Sample holder(adjustable) 6 x 0.1 to 3.2mmElectrical Requirement 100/120 or 220/240 V 50/60 Hz. 750 wattDimnsions 390W x 310D x130H mm (15" x 12” x 5”)Weight 8 Kg (18 lbs) Solvent Resistance Tester The Cemco-Fsl Solvent Resistance Tester is used to assess the ability of markings, solder resist and insulation coatings on printed circuits to withstand the application of specified solvents and fluxes. The test sample is clamped in a stainless steel tray and immersed in a specified fluid. Depending on the application, a weighted felt or bristle pad is attached to the reciprocating arm. The required number of cycles is set on the counter, and when the machine is started the arm will cycle until the preset number is reached.Key Benefits: Simple to use Large and small sample trays included Felt or bristle pad attachments Test cycle pre-set up to 99,999 Robust construction, minimum maintenance The machine is designed to enable testing in accordance with IEC 326-2 test method 17a. Technical Specification: Electrical Requirements: 220/240 volt, 50 Hz, 100 watt Test Counter: up to 99,999 cyclesDimension: 320W x 535D x 190H mm (13" x 21" x 8")Weight: 10 Kg (22 lbs ACCELERATED AGEING MACHINE The Cemco-Fsl Accelerated Ageing Machine is designed to simulate the effects of long-term storage on printed circuit samples. After the test, the samples can be assessed for solderability. An automatic test cycle of only 100 minutes exposes the p.c.b. samples to a steam/oxygen enriched atmosphere. This short duration test reproduces conditions equivalent to 10 days damp heat or 12 months natural storage.The machine is designed to enable testing in accordance with IEC 326-2 test method 20a.Key Benefits: Suitable for simulated storage of printed circuits, electronic components, cosmetics, food stuffs, etc. Very short test time Fully automatic test sequence Built-in safety interlocks Corrosion resistant polyester resin cabinet PLC Control Technical Specification: Electrical Requirements : 220/240 volt, 50 Hz, 13A Gas Requirement : 1. Zero Grade Nitrogen - 0.14 Kg/sq. cm (5 psi) at 500 ml/min 2. 80% Nitrogen /20% Oxygen- 0.14 Kg/sq.cm (5 psi) at 100ml/min(Pure oxygen can be used)Water : De-ionised and Standard mains 2 l/min, 15-20 psiDrain : Open to atmosphereDimensions : 787W x 457D x 584H mm (31" x 18" x 23")Weight : 25 Kg (55 lbs Summary of My Selling Policies Contact Us If you have any problems or questions please do not hesitate to contact us. The easiest way to contact us is via eBay messages, and we will get back to ASAP. Alternatively, you can reach us by phone, if we are not available to answer your call personally please leave a message and we will get back to you ASAP, sorry no mobiles and non-specific landline numbers 0870, 0845 etc. Phone:- 0121 288 9761 (UK landline rates) Business Hours: Monday to Friday from 9:00 AM to 5:00 PM GMT Europe, Saturday 10:00 AM to 3:00 PM GMT - Sunday and Holidays closed. Fees All you pay is the final value fee, postage and any upgrades to the delivery service such as extra insurance that you may require. Note for VAT registered buyers, a VAT receipt will not issued since we are not currently VAT registered, if our VAT status changes we will update the item description accordingly to reflect this. Shipping The postage stated is for UK mainland only. Please ask for postage rates to Northern Ireland, UK Islands, Scottish Highlands and remote regions. The automatic postage stated in the ad is for UK mainland only. If you do not add any additional costs for shipping, your order may be delayed. Items will only be shipped to within the UK; currently no European or Worldwide service is available or will be provided unless stated. We'll post your order within 2 to 3 business days after confirmation of your order and verification of your payment information. Items are generally shipped using a Courier Service. Smaller items may be shipped using Royal Mail Standard services. Deliveries generally take between 1 to 5 working days to reach all UK addresses. Usually between 24hr to 72hrs for UK mainland and longer for remote regions. Proof of postage is always obtained. Orders are processed Monday to Friday. REMOTE REGIONS OF THE UK: Please email us for the correct delivery charge. By bidding on this auction you are accepting to pay the difference in postage. We will only post on receipt of the full funds required. Delivery We post items upon clearance of funds as stated above. You will receive an email when payment is received, and again when your purchase is ready to post. You can view the status of you order on eBay. You should receive the item within 7 working days from this day. To make a claim for lost items after this date please email us. Collection and Viewing Selected items are available for viewing strictly by appointment only. Items can also be collected in person by prior arrangement at the end of the sale. Refunds & Returns All items can be returned within 7-days unless advertised differently. Please note that buyers are responsible for all shipping charges, both sending and receiving. No refund for shipping will be given unless the item is damaged in transit or incorrectly described. If the item you have ordered is incorrectly described, contact us within the return period and a refund for the item and outbound postage will be issued in the form of the original payment method or a company cheque. The buyer is responsible for all return postal charges. (Within the UK for incorrectly described items, a reasonable return charge maybe be refunded by us however this is entirely at our discretion, in all cases the postal refund will not exceed the original delivery charge)If the item is damaged in transit, contact us within the 12 hours, on return of the item a refund for the item and outbound postage will be issued in the form of the original payment method or a company cheque. Buyer is responsible for all return shipping charges (Within the UK for damaged in transit items, a reasonable return charge maybe be refunded by us however this is entirely at our discretion, in all cases the postal refund will not exceed the original delivery charge) Specific terms are: For a refund the item must be returned within 7 days of receipt and in the condition the item was sent out. Returned items must be unused and undamaged unless sold otherwise. We carefully inspect returned items upon receipt before issuance of refunds, credits, or exchanges. Merchandise should be carefully packed and insured for the full purchase price and posted via a traceable means (Post Office, UPS, FedEx, etc.) Absolutely no walk-in return/replacement service will be accepted without prior arrangement. Short-shipments, DOA and Deviations products must be reported within 5 days from delivered date. A refund will be issued if replacement is not available. Pick up service is not available for return merchandise. Returns may be subject to a 15% restocking fee. The customer pays for the return postage and it is at the management’s discretion to apply any refund.We will inspect all returns, and it is the management’s discretion to repair or replace or return as appropriate. Exchange of large sums of money are subject to anti money laundering rules, and therefore refunds maybe referred to the local tax authorities for verification. Refunds to non UK based buyers will only be made under exceptional circumstances, large amounts will always be referred to the local tax authorities and there will be a 15% processing fee. Warranty and Guarantees For all items, no warranty or guarantee is given or implied unless clearly stated in the description. It is entirely the reasonability of the buyer to insure that the item is fit for the required purpose and meets all relevant standards. Non UK Buyers Please ask for postage costs prior to bidding. Any and all subsequent export tax, import tax and other local tax liabilities are solely your responsibility. All payments must be made by a verified paypal account in British sterling.
Place a Bid!
|
|