1" Radiant O2 Barrier PEX 100- Red-1 Roll of 1000 FREE SHIPPING!! BEST VALUE ON QUALITY PEX!! Start Price USD 920.00 Current Price USD 920.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Tuesday, December 02, 2008 End Time Tuesday, December 09, 2008 Location Your PEX Supply Store See more about ' 1" Radiant O2 Barrier PEX 100- Red-1 Roll of 1000' Description 1" PEX Radiant Heat PEX TUBING 1000' RED FREE SHIPPING TO LOWER 48   Questions? Call 1-877-305-0912   This listing is a brand new, boxed,  fresh production of 1" cross-linked Polyethylene (PEX) with Oxygen Barrier.  This will be for 1 roll of boxed x 1000ft Red PEX.  Contact us for other diameter requirements or if you need with oxygen barrier.  1/2", 3/4" and 1" available. With our factory located in Europe producing PEX for the past 20 years; it has a proven track record of quality.  We have all the ASTM/NSF/CSA certifications and specifications which are labeled on the PEX tubing as required.  The quality, material, workmanship, and certifications in our product are the same as Wirsbo and some other names producing PEX.  You can use Wirsbo fittings and tools on this PEX or any other ASTM 876/877 fittings.  See certifications section below. Feel free to contact for brochure. APPLICATIONS: PEX Radiant tubing can be used in concrete slabs, under floor, under raised floor, outdoor concrete slabs or ground to melt ice or snow, and solar heating through the building.  The Radiant tubing can also be used for PEX for potable water since it has all the certifications Compatible with all fittings such as pressure fittings, crimp fittings, and even Wirsbo fittings that are ASTM/NSF/CSA. Although the PEX has UV resistance, PEX should not be placed in the sun or have UV exposure. DESCRIPTION: The high tech tubing is made of high density polyethylene (HDPE) with high molecular with resins.  The polyethylene (PE) is cross-linked (X) by a chemical process with high rates of pressure and temperature.  Think of the cross-link as a mesh around the pipe which allows durable expansion and return to original shape.  This improves the properties of ordinary polyethylene (PE), giving it the characteristics of new type of high-tech material.  The pipes are designed for working pressures up to 24 bars (348 PSI) and for working temperatures of up to 203 degrees F (95 C) but can withstand temperature surges of up to 230 degrees F (110 C).  Certification ratings are far under designed production ratings.  See certified specifications below. This PEX will fit all ASTM/NSF/CSA fittings.  If you get a kink, you can remove kinks with heat.  The memory in our PEX is excellent with a 300% expansion and return to shape.  If water freezes, the PEX is designed to expand without bursting and return to original shape when it thaws.   1" ID Available Colors: Red All tubing is marked so there is no measuring or guessing in the length.  The marks are designated in FTXXX where XXX is the foot number of the spool.  Example.  If you need 300ft of a 1000ft spool, you start at beginning and make cut at FT300. CONTINUOUS ASTM RATINGS: 73.4F at 160 PSI 180F at 100 PSI 200F at 80 PSI CERTIFICATIONS: Pipe has been developed, tested and approved for central, solar, and under the floor heating systems and also for hot and cold potable water service to the following standards which are all marked on the tubing.  As required by codes, all certifications are labeled on the PEX. American Society of Testing Materials. ASTM F876 -  Standard Specification for Crosslinked Polyethylene (PEX) TubingThis specification covers crosslinked polyethylene (PEX) tubing that is outside diameter controlled, made in standard thermoplastic tubing dimension ratios, and pressure rated for water at three temperatures (73.4F @ 160 psi, 180F @ 100 psi, 200F @ 80 psi). Included are requirements and test methods for material, workmanship, dimensions, sustained pressure, burst pressure, environmental stress cracking, stabilizer migration resistance, and degree of crosslinking.  Methods of marking are also given. ASTM F877 - Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution SystemsThis specification covers requirements, test methods, and methods of marking for crosslinked polyethylene plastic hot- and cold-water distribution systems components made in one standard dimension ratio and intended for 100 psi (0.69 MPa) water service up to and including a maximum working temperature of 180F (82C). Components are comprised of tubing and fittings. Requirements and test methods are included for materials, workmanship, dimensions and tolerances, burst pressure, sustained pressure, excessive temperature and pressure, temperature cycling tests, and bend strength. Also included are tests related to system malfunctions. The components covered by this specification are intended for use in residential and commercial, hot and cold, potable water distribution systems as well as sealed central heating, including under-floor heating systems. CSA B137.5 - Canadian Standards Association for Cross-Linked Polyethylene (PEX) Tubing Systems for Pressure Applications Gives requirements for crosslinked polyethylene pressure tubing systems. Components that are covered in this standard are meant for use in residential and commercial hot and cold potable water distribution systems, also sealed central-heating (including under-floor) systems. National Sanitary Foundation   NSF 61- Drinking Water System Components – Health EffectsThis Standard is intended to cover specific materials or products that come into contact with: drinking water, drinking water treatment chemicals, or both. The focus of the Standard is evaluation of contaminants or impurities imparted indirectly to drinking water. NSF 14 - Plastic Piping System Components and Related MaterialsThe physical, performance, and health effects requirements in this Standard apply to thermoplastic and thermoset plastic piping system components, including but not limited to pipes, fittings, valves, joining materials, gaskets, and appurtenances. The established physical, performance, and health effects requirements also apply to materials (resin or blended compounds) and ingredients used to manufacture plastic piping system components. It provides definitions and requirements for materials, ingredients, products, quality assurance, marking, and record keeping IAPMO - International Association of Plumbing & Mechanical Officials ICBO - International Conference of Building Officials WARRANTY: 25 YEAR warranty.  Don't be fooled by the other longer warranties from top brands where the installer has to be trained by their company to get their warranties.  Warranty information will come with the product or be emailed to you. SHIPPING: Email your zip code for shipping quote.  Discounts available in volume and shipping to commercial building. VOLUME ORDERS:  We are able to handle any volume.  Contact us for more information and large volume discounts.  OPPORTUNITY:  We have open positions for distributors in some states.  If interested in exploring this opportunity, feel free to email. Click to see other PEX listings.  QUESTIONS? Click Ask Question or call 877-305-0912         Place a Bid!